TeachMeFinance.com - explain Cavitation
Cavitation The term 'Cavitation' as it applies to the area of reclamation can be defined as 'The formation of partial vacuums in fast-flowing water caused by subatmospheric pressures immediately downstream from an obstruction or offset. Usually accompanied by noise and vibration. The formation of voids or cavities caused in a liquid due to turbulence or temperature which causes the pressure in local zones of the liquid to fall below the vapor pressure. This happens on the backside of ship propellers, water turbines, blades in pumps, in high-velocity flow lines, and similar locations, depending on the design of equipment and degree of turbulence. The formation and collapse of a gas pocket or bubble on the blade of an impeller or the gate of a valve. The collapse of this gas pocket or bubble drives water into the impeller or gate with a terrific force that can cause pitting on the impeller or gate surface. Cavitation is accompanied by loud noises that sound like someone is pounding on the impeller or gate with a hammer. The attack on surfaces caused by subatmospheric pressures immediately downstream from an obstruction or offset. Usually accompanied by noise and vibration'.
About the author
Copyright © 2005-2011 by Mark McCracken, All Rights Reserved. TeachMeFinance.com is an informational website, and should not be used as a substitute for professional medical, legal or financial advice. Information presented at TeachMeFinance.com is provided on an "AS-IS" basis. Please read the disclaimer for details.